Hello Thanks in Advance For Your time
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance
My n7000 had r5 kernel with carbon rom 4.4. I Chose to reboot to system from kernel it asked me 1)no 2)fix system reboot i chose 2 and i got stuck at reboot loop but i could access recovery and download mode.
then i try to install philz_touch_6.07.9-n7000 after wiping data cache and dalvik through recovery and rebooted back to philz recovery
after then i flash [ROM][4.4.2] CyanogenMod 11.0 [OFFICIAL][NIGHTLIES] after wiping data cache and dalvik
and i got stuck at samsung logo cant get into recovery mode but can access download mode
i tried to reflash philz kernel through odin but it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I cant even charge my phone it shows 100% battery when i plug in
Please help Thanks in advance