Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.